5520B Oscillator Plating System Saunders & Associates, Inc.
The Saunders & Associates, Inc. 5520B Oscillator Plating System is a final frequency adjustment system for testing and plating of oscillators in leaded or surface mount packages. The system uses gold or silver to plate two devices at the same time. X-Y table positioning indexes the plating head to each device. Pass/Fail measurements to customer specifications are made on each device. The system can be configured to accommodate customer specified device packages and device carriers.
5520B Cryo System
The 5520B Oscillator Plating System consists of the following:
System controller with Saunders & Associates, Inc. TTL [/0 card and two Saunders & Associates, Inc. counter cards installed
Monitor with stand
Saunders & Associates, Inc. 5520B System Interface Module
Saunders & Associates, Inc. 55B Water Cooling Module
Power supply (two)
X-Y table stepper motor assembly
Power box assembly
Roughing pump
Vacuum pump (cryogenic or turbo)
Cryo compressor (systems with cryogenic pump)
Light pole
SPECIFICATIONS
Frequency Range: I MHz to 300 MHz
Plating Perfonnance: ±2 ppm, typical final frequency
Capacity: Two pallets, typical (actual capacity determined by device size)